TOYOTA
TUNDRA D-CAB
2004 -
VSE SUBWOOFER (NON-JBL)
Procedure
(w)
Wire tie the harness to the factory harness
next to the brown factory wire tie clip.
(Fig. 8x)
Fig. 8x
Wire tie
Factory clip
9.
In Process Functional Test.
(a)
Reconnect the harness to the radio.
(1)
Reconnect the Satellite radio harness if so
equipped
(2)
Reconnect antennae cable.
(b)
Reinstall radio.
(1)
Be sure the wire harness is not pinched.
(c)
Securely fasten (hand tighten) the four (4)
mounting fasteners using the 10mm socket.
DO NOT OVER TIGHTEN
(d)
Reconnect the negative battery terminal.
(Fig. 9a)
Negative Battery Cable
Torque Wrench, 10mm Socket
Fig. 10-1
90˚
(1)
Position the negative terminal at an angle
of 90˚ to the battery as shown.
(2)
Tighten the nut with 4.1 N-m (36 lbf-in)
of torque.
(3)
Be careful not to touch the positive
battery terminal.
(e)
Turn ignition key to "ACC" position.
(f)
Press the power button on the receiver/player
head unit. Verify the backlighting
illuminates.
(g)
Verify that the green led on the VSE is
illuminated, and that sound is coming out of
the driver.
NOTE:
If the green light on the VSE unit is
illuminated, and there is no sound coming from
the driver –then one (or more) of the four (4)
speaker wires are disconnected.
Page 7 of 12 pages
Issue: A 12/15/04
