Bayside Furnishings
®
Page 6 Factory No. 16366
1.
Unpack the unit and confirm that you have all the hardware and required parts.
2.
Remove the Mounting Bracket (I) from Electric Firebox (H) by unscrewing the two screws that secure
the Mounting Bracket to the top of the Electric Firebox, using a Phillips screwdriver. As shown above.
3.
Find the optimal place to mount your Wall-mounted Fireplace. Consider the proper position relative to
your room, placement of furniture and windows.
4.
Hold the Mounting Bracket (I) up to the wall to verify the correct location and ensure that the Mounting
Bracket is level. Use a pencil to mark the four mounting holes on the wall at the desired mounting
location, using the Mounting Bracket (I) as a template.
5.
With an electric drill (not included) on its low setting, drill 5/16 inch diameter holes to at least 2 inch
deep on the marked points.
NOTE:
If installing the Mounting Bracket (I) to a wall stud, there is no
need to drill the holes in the wood and no need for the plastic wall anchors. It is recommended to
install the mounting bracket to at least one wooden stud.
Installation – Wall Mount
H
H
I
I
