Bayside Furnishings
®
Page 16 Factory No. 16366
The blower motor and flame motor are pre-lubricated for a durable using time and need no further
lubrication or maintenance. To remove any accumulation of dust or fluff the soft brush attachment of a
vacuum cleaner should occasionally be used to clean the outlet grille of the fan heater.
Use a soft, clean cloth that will not scratch the surface when dusting.
Use a clean soft cloth dampened with warm water to clean the fireplace surface.
DO NOT
use household
or abrasive cleaners, as these products may damage the surface.
When cleaning the glass viewing screen use a non-abrasive damp cloth with liquid cleaner or soft soap
if necessary;
DO NOT
use cleaning powders or any other substance with abrasives since these
substances will scratch glass.
Under no circumstances should this product be operated with a broken or chipped glass panel.
Do not strike or slam the glass.
In the event that your appliance is stained or otherwise damaged during use, we recommend that you
call a professional to repair your furniture.
When not in use please unplug the cord from the outlet to prevent any damage or accidental plug of the
cord.
ALWAYS DISCONNECT FROM THE POWER SUPPLY BEFORE CLEANING THE
HEATER. FIRST TURN OFF THE MAIN POWER. THEN REMOVE THE ELECTRICAL PLUG FROM THE
WALL OUTLET.
DO NOT USE THIS FIREPLACE INSERT IF ANY PART OF IT HAS BEEN UNDER
WATER. IMMEDIATELY CALL A QUALIFIED SERVICE TECHNICIAN TO INSPECT THE FIREBOX AND
REPLACE ANY PART OF THE ELECTRICAL SYSTEM WHICH HAS BEEN UNDER WATER.
A Touch-up Pen has been provided to repair any small nicks or scratches that may occur during
assembly or shipping.
The Fireplace is now ready for you to enjoy for many years to come.
We hope you enjoy your purchase for many years and thank you for your purchase!
ELECTRIC FIREBOX PARTS LIST
Part Name
Part Number
Flame Generator Drive Motor
WINWMFP-FGDM
Heater WINWMFP-H
Blower WINWMFP-B
Log Set
WINWMFP-LS
Main PCB
WINWMFP-MPCB
Control Panel PCB
WINWMFP-CPPCB
Flame Light PCB
WINWMFP-FLPCB
Side Light PCB
WINWMFP-SLPCB
Ember Bed Light PCB
WINWMFP-EBLPCB
Remote Control - 6 Buttons
WINWMFP-RC
CARE & MAINTENANCE INSTRUCTIONS
