Bayside Furnishings WINWMFP, Руководство пользователя

Страница: 15 / 18

Bayside Furnishings
®
Page 15 Factory No. 16366

Using the Heater Control Button

Adjusting the Ambient Side Lighting

Using the Timer Control Button
Pressing the timer control button (5) will set the timer.
This interval period is shown in the display unit (6) on
the control panel on the side of the electric fireplace.
The set intervals are listed in the table.

No Heat Function (Demo Mode)
To turn off the heat mode, press and hold the control panel heater button for 10 seconds to enter heat
lock out mode.
Ember bed lights will flash 6 times to signal the heat function is turned off and locked out.
When the heater button is pressed in lock out mode, the ember bed will flash 6 times until heating
mode is turned on.
To turn on heating mode, press and hold the control panel heater button for 10 seconds, the ember
bed will flash 6 times and the heat function will be restored.
Display Value Temperature Setting
0 64
℉
/18
℃
1
66
℉
/19
℃
2
68
℉
/20
℃
3
70
℉
/21
℃
4 72
℉
/22
℃
5 74
℉
/23
℃
6 76
℉
/24
℃
7
78
℉
/25
℃
8
80
℉
/26
℃
9
82
℉
/27
℃
N ON
Button Press Ember Bed Color
1
st
press Blue
2
nd
press Amber
3
rd
press Amber and Blue
4
th
press Color Rotation
5
th
press OFF
Button Press Timer Interval Display Value
1
st
press 1 Hour 1
2
nd
press 2 Hour 2
3
rd
press 3 Hour 3
4
th
press 4 Hour 4
5
th
press 5 Hour 5
6
th
press 6 Hour 6
7
th
press 7 Hour 7
8
th
press 8 Hour 8
9
th
press OFF NONE
Operation (continued)
The heater control button (3) turns the heater on and off.
With the unit ON, press the control panel heater button
(3) for 5 seconds and enter temperature adjustment
mode. In the adjustment mode, the digital indicator (6)
will flash.
Press the control panel heater button (3) to change to
the desired temperature. There are 10 temperature
settings. Reference the table for more detailed
information.
After the temperature is selected, the digital display (6)
will stay on for 10 seconds, then turn off.
Press the side light control button (4) to turn on the
ambient lighting.
To change the color of the lighting press the side
light control button (4) again. You can control the
side lights color as described in the table. The color
rotation mode will cycle through the 3 different color
settings continuously.
NOTE: If this product experiences exceptionally
high temperature, it may automatically stop heating.
If this occurs the product should be unplugged or
isolated from the main supply for a period of 30
seconds before the power is then re-supplied.