Bayliner 2005 289 Classic, Руководство пользователя

Страница: 47 / 76

289 • Owner’s Manual Supplement Chapter 6: Plumbing
41
Marine Head & Holding Tank
•
Before using this
system, read the
marine head’s
operation and
maintenance
manual.
•
Look at the side
of the holding
tank to check the
content level.
•
The dockside
pump-out deck
fitting is marked
WASTE.
•
Empty the hold-
ing tank at every
opportunity.
Using the Marine
Head
1. Open the head’s
seawater intake
seacock.
2. Before using the
head, pump
water into the
bowl to wet the
sides.
3. After use, pump
until the bowl is clean.
4. Pump a few more times to clean the lines.
5. If excess waste causes the water to rise in the bowl, stop pumping until the water recedes.
•
Close the intake seacock when the system will not be used for long periods of time.
Winterizing the System
Read the marine head’s operation and maintenance manual for winterizing instructions.
Check with local authorities for regulations regarding the legal use of marine head systems.
NOTI CE
FLOODING and SWAMPING HAZARD!
•
Close the seawater intake seacock when leaving your boat unattended for any length of
time.
•
If the seacock is left open, a hose failure could flood the bilge, swamp the batteries and the
engine, and even sink your boat.
WARNI N G! !
HOLDING TANK PUMP-
OUT DECK FITTING
HOLDING
TANK VENT
MARINE HEAD
HOLDING
TANK
MACERATOR
(IF EQUIPPED)
SEAWATER INTAKE
SEACOCK
UNDERWATER DISCHARGE
SEACOCK (IF EQUIPPED)