MX08 Multichannel Weighing System, Technical Manual, Rev. 2.5 Page 50 of 144
Power Supply Connection:
The pin configuration of the 24 VDC power supply connector located on front bottom of the
instrument is shown in Figure 6.3. Proper grounding is very important for the accuracy and
the safety of your measuring system. Before interfering the instrument, please turn off the
power and wait at least for 30 seconds.
Warning:
Connect the grounding terminal to the reference ground.
24V 0V
Figure 6.3 - Pin layout of MX08 IO 24 VDC connector
7.3. MX08 IO Status
MX08 IO instruments are followed by xFace software which is connected via Gateway
instrument. xFace status tab provides you information of input and output status.
Additionally, I/O test function helps you to change output conditions. Be careful while
changing output conditions to not to damage your devices connected to outputs. Or unplug
output connector before output testing.
Figure 6.4 - MX08 IO Status
