BAYKAL
EDITION NO :
APH
SECTION :
DATE OF ISSUE :
July-2005
PAGE :
72
These methods of crowning are, however, very labor-intensive, not very
flexible, difficult to repeat, and result in a significant loss of production time.
These problems can be eliminated by the manually operated anti-deflection
device developed by
Wila.
The
Wila
crowning devices
(See Figure 6.5.9.2)
compensate the deflection
of the press brake quickly and accurately.
Manual models (as shown in Figure
6.5.6.2) are adjusted simply by turning a hand crank; the built-in numerical read-
out provides a bench-mark for repeatability.
Figure 6.5.9.2
The first time you set up your new ModuCrown device, you can use these fine-
tuning "push/pull" screws to compensate for small inaccuracies in the brake's
bed
(See Figure 6.5.9.3)
. After that, the ModuCrown operates from a single
point for effortless compensation.
Figure 6.5.9.3
Содержание APH Series
