114312 Rev. C
2-1
Chapter 2
Installing the HRPSU
This chapter describes
•
Cabling options for network devices
•
Mounting the HRPSU in a surface stack or in a rack
•
Installing power supply modules in the HRPSU
•
Installing an adapter for 16-pin cables
•
Connecting a network device to the HRPSU
•
Switching on and verifying power connection
Cabling Options
There are three options for cabling a network device to an HRPSU power supply
module. Table 2-1 explains the options and indicates the figure that illustrates each
one.
Depending on your network device, you will use 24-pin cables, or 16-pin cables
with an adapter. Refer to the figure for the cabling option that applies to your
device.
Table 2-1.
Options for Cabling a Network Device
To Connect
Cable Type
Number of
Cables
Used
Figure Number
ASN
24-Pin 1
Figure
2-1
5000 Device
16-Pin
1
Figure 2-3
28000 Device
16-Pin
2
Figure 2-4