Bay Networks CLAM, Справочное руководство, Страница: 125 / 188

Changing Device Settings
118814-A Rev. A 9-11
Issue 1
If no path is found for the incoming number, the
receiving unit will challenge the sending unit to
identify itself. The sending unit responds with its
passwords and the receiving unit will match these
against the passwords on one of its paths. If no
match is found the call is dropped; if the passwords
do match, the call is accepted.
• Enforced: With Enforced set as the value for CLI,
an incoming call must match against an ISDN
number set up on a path in the receiving unit. If no
match is made the call is immediately dropped. If a
match is found, then authentication will take place.
Parameter: Mode
Default: BRI
Options: BRI, LEASEDPP
Function: This option specifies the type of connection; BRI is the
default. BRI is used for the standard ISDN BRI switched
circuits. If you are using a leased line ISDN connection
(Type 4), select LEASEDPP.
Instructions: leased line ISDN and normal switched ISDN cannot be
used on the same ISDN-TA.
Parameter: MSN
Default: (Blank)
Options: A valid MSN
Function: MSN is an option you buy from your service provider.
Specifying an MSN in this field limits incoming data
calls to this number only. Data calls coming in on any
other number are ignored by the unit.
Instructions: The format of the MSN specified here is also dependent
on your service provider. Some providers require that the
entire number is entered (for example 202036); others
require only the MSN itself (for example 6 or 06). You