Bay Networks 3395A Скачать руководство пользователя страница 88 | Manualshive

Страница: 88 / 146

background image

Setting Up ARAP

6-4

893-826-A

Specifying Optional ARAP Port Characteristics

You may also want to alter PORT characteristics that affect ARAP sessions.
The following is a summary of these PORT characteristics. Refer to the Model
3395/3395A Commands Reference for more information.

•

DEFINE PORT port-list ARAP ZONE ACCESS value

You can permit or restrict remote users from having access to various
AppleTalk zones with this command. The value can be ALL (the default)
for access to all AppleTalk zones, NONE for access to no AppleTalk
zones, LOCAL for access only to the zone that the server is in, or a single
zone-name, for access to a specific AppleTalk zone in addition to the zone
that the server is in. A zone name can be up to 32 characters in length and
must be enclosed in the double-quote (") character. (You cannot use the
double-quote character as part of the zone name.)

•

DEFINE PORT port-list ARAP MAXIMUM CONNECT TIME
UNLIMITED/time

You can either limit the amount of time that users can remain connected or
allow users to remain connected for an unlimited amount of time using
this command. If you specify a time (in minutes), the Remote Access
client will be disconnected after being connected for the specified amount
of time. You can also specify UNLIMITED, which means that the user can
remain connected for an indefinite amount of time. UNLIMITED is the
default.

•

SET PORT port-list ARAP TIME REMAINING UNLIMITED/NONE/
time

UNLIMITED means that users at the port can now remain connected for
an indefinite amount of time. NONE means that users at this port will be
disconnected immediately (i.e., they have no more time). A value for time
means that users at the port can now remain connected only for the
specified amount of time. Specify the amount of time in minutes. The user
will be notified of the change.

•

DEFINE PORT port-list ARAP GUEST LOGINS ENABLED/
DISABLED

This command specifies whether or not users can log on to the server via
ARAP as a “guest” user (no password is required to log on as a guest
user), rather than as a “registered” user. ENABLED means that a user at
the port can log on as a guest user. DISABLED means that a user at the
port cannot log on as a guest user and must be a registered user.
DISABLED is the default.

Install CCL Scripts

CCL scripts are required at ports that use ARAP. Chapter 8 covers CCL scripts
in more detail.

«
...
86
87
88
89
90
...
»

Содержание 3395A



















































































































































Отзывы:

Нет отзывов

Похожие инструкции для 3395A

Бренд: SEH Страницы: 5

Бренд: IBM Страницы: 194

Бренд: IBM Страницы: 10

System x3650 M4 BD Type 5466

Бренд: IBM Страницы: 786

Бренд: Docomo Страницы: 61

TotalStorageFAStT900

Бренд: IBM Страницы: 112

NovaScale T860 F2

Бренд: Bull Страницы: 36

Бренд: Bosanova Страницы: 2

TEW-MP2U - Wireless Multi-Function Print Server

Бренд: TRENDnet Страницы: 2

SDSTX3110-121-LRT-B

Бренд: Transition Networks Страницы: 2

Бренд: Black Box Страницы: 4

Бренд: Black Box Страницы: 12

MultiAccess MA220

Бренд: Multitech Страницы: 80

Linux Virtual Server

Бренд: Red Hat Страницы: 82

Бренд: R.V.R. Elettronica SpA Страницы: 128

Бренд: AirLive Страницы: 89

Бренд: Mirapoint Страницы: 98

Бренд: ICPDAS Страницы: 104

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды