manualshive.com logo in svg

Bay Networks 3395A, Руководство по настройке

Bay Networks 3395A - мощный сетевой маршрутизатор с дополнительными функциями безопасности. Благодаря Configuration Manual можно легко настроить устройство для оптимальной производительности. Загрузите бесплатно руководство на русском языке с сайта manualshive.com, чтобы получить максимум от этого продукта.

Поделиться
Скачать
background image

Model 3395A Server Support for the Xremote Protocol

7-6

893-826-A

When users at ports 8-10 log in, the communication server software 
automatically activates the Xremote process and searches for the XDM host at 
the Internet address 129.70.110.83. If the communication server is successful, 
an XDM login window appears on the screen.

When users at ports 11-16 log in, the Model 3395A server prompt appears on 
the screen. These users must enter the XCONNECT command to establish an 
Xremote session. Users can provide the domain name or Internet address of an 
XDM host or simply enter the XCONNECT command to use the previously 
defined host and query type.

The following command causes the communication server to search the 
permanent database for an XDM host or the broadcast query type for this port. 
In this example, the XDM host has been defined as 129.70.110.83.

TS3305> xconnect

The following command specifies an XDM host at the address 130.63.110.79.

TS3305> xconnect 130.63.110.79

Establishing an Xremote Session

When a communication server port requests an Xremote session, the 
communi-cation server either sends XDMCP messages to the XDM host or 
broadcasts XDMCP messages to the network if the query type is 
BROADCAST. If a host agrees to manage the display, the Xterminal 
automatically switches from ANSI emulation mode to Xterminal window 
mode. (The serial-session window dis-appears at this point.) The XDM 
establishes an initial master session, and the XDM login window appears after 
a few seconds. This procedure uses two active communication server sessions.

When you log in at the XDM login window, the XDM runs the Xsession file, 
which usually executes the .xsession file in your home directory. This usually 
starts up additional windows and a window manager. You can also connect to 
other XWindows hosts and open windows from those hosts.

An Xclient process on a host running XWindows connects to the NCD 
Xserver on the NCD Xterminal through the communication server. This 
connection accounts for one communication server session. Each 
communication server session corresponds to one Xclient process, and 
each window you open accounts for one Xclient process. The SHOW/
MONITOR SERVER XREMOTE display shows the total number of active 
Xclients on the communication server. If you want to observe Xclients or active 
communication server sessions on a specific port, use the SHOW/MONITOR 
SESSIONS PORT x command.

If an XDM host refuses to manage the display, or the XDMCP request times 
out, the Xterminal remains in ANSI emulation mode. If the query type is 
SPECIFIC or you specified a host with the XCONNECT command, an error 
message appears on the screen. If the query type is BROADCAST or 
INDIRECT, the communication server searches for another XDMCP host. If it 
does not find one after repeated attempts, an error message appears on the 
display. The communication server remains in ANSI terminal emulation mode, 

Содержание 3395A



















































































































































Отзывы:

Нет отзывов

Похожие инструкции для 3395A

LaCie 5big - Network NAS Server Quick Start Manual preview
5big - Network NAS Server
Бренд: LaCie Страницы: 9
LaCie 2big NAS Quick Install Manual preview
2big NAS
Бренд: LaCie Страницы: 14
IBM OpenPower 720 Technical Overview And Introduction preview
OpenPower 720
Бренд: IBM Страницы: 74
Navico SonicHub 2 Installation Manual preview
SonicHub 2
Бренд: Navico Страницы: 2
Advantech ASMB-977 Startup Manual preview
ASMB-977
Бренд: Advantech Страницы: 3
TYAN GT24B-B7076 Service Engineer'S Manual preview
GT24B-B7076
Бренд: TYAN Страницы: 87
ZyXEL Communications NPS-520 Quick Start Manual preview
NPS-520
Бренд: ZyXEL Communications Страницы: 115
Seagate 8-BAY RACKMOUNT NAS Quick Start Manual preview
8-BAY RACKMOUNT NAS
Бренд: Seagate Страницы: 20
Seagate BlackArmor NAS 420 User Manual preview
BlackArmor NAS 420
Бренд: Seagate Страницы: 64
Simpact Freeway 2000 Hardware Installation Manual preview
Freeway 2000
Бренд: Simpact Страницы: 86
Polycom RSS 2000 V1.0 Getting Started Manual preview
RSS 2000 V1.0
Бренд: Polycom Страницы: 11
DSP 104-plus Reference Manual preview
104-plus
Бренд: DSP Страницы: 140
Air Live WFP-101U v2 Quick Start Manual preview
WFP-101U v2
Бренд: Air Live Страницы: 87
Gigafast EE171-PR User Manual preview
EE171-PR
Бренд: Gigafast Страницы: 74
Meinberg LANTIME M600 MRS User Manual preview
LANTIME M600 MRS
Бренд: Meinberg Страницы: 160
UNIVIEW VM8500-E Quick Manual preview
VM8500-E
Бренд: UNIVIEW Страницы: 44
Inspur NF5166M4 User Manual preview
NF5166M4
Бренд: Inspur Страницы: 147
3onedata NP308T-8D User Manual preview
NP308T-8D
Бренд: 3onedata Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды