STATUS ANNOUNCEMENTS - 4G CELLULAR
Announcement
“Calling for help.”
“# bars.”
“No cell service.”
“No data
connection.”
“Zone #, pair
device.”
“Paired wireless
Help Button.”
The Base Unit has received
an alarm signal and is
starting its process of
calling the respone center.
The Base Unit is
programmed to state how
strong its current cellular
signal is.
The Base Unit is not
detecting the cellular
network.
The Base Unit is not
detecting a data
connection.
Wait for the call to be connected to an
attendant. Do not press the Personal Help
Button again or attempt to disconnect the
call.
Re-position the unit in the home to obtain
a better cell signal. If these steps do not
correct the problem, verify that sufficient
cell coverage is available at the residence.
The Base Unit needs service. Please
contact Bay Alarm Medical at
1-877-522-9633.
The Base Unit needs service. Please
contact Bay Alarm Medical at
1-877-522-9633.
The MODE button has been
pressed twice, the unit is
ready to pair accessories
into the specified zone.
Pair your Personal Help Buttons to Base
Unit. Please see pairing instructions.
“Please check
power
connection.”
The Base Unit is unplugged
from the wall or AC power
outlet is not energized.
Verify the power block is plugged into an
active AC power outlet that is not
controlled by a light switch.
The Base Unit has paired a
new Personal Help
Button/transmitter.
Pair a new wireless Help Button to the
Base Unit.
“Range test
mode.”
“System ready.”
The MODE button has been
pressed four times, placing
the unit in Range Test
Mode.
Walk around and press the Personal Help
Button to conduct a range test. Please see
instructions for how to do so.
The system is in normal
operation and ready to
process alarm signals.
You are ready to use your Personal Help
Buttons when needed.
What It Means
What You Should Do
6
When troubleshooting, the Base Unit may announce its status. Below are the description of those
statuses, meaning, and the actions you should take.
