background image

© Baxi Heating UK Ltd 2010

710356901 (04/10)

All descriptions and illustrations provided in this leaflet have been

carefully prepared but we reserve the right to make changes and

improvements in our products which may affect the accuracy of the

information contained in this leaflet. All goods are sold subject to our

standard Conditions of Sale which are available on request.

M U L T I F I T

A   R e g i s t e r e d   T r a d e m a r k   o f   B a x i   H e a t i n g   U K   L t d   ( 3 8 7 9 1 5 6 )

Brooks House, Coventry Road, Warwick. CV34 4LL
Technical Enquiries 0844 871 1555
Websites:- www.baxiheating.co.uk
e&oe

5.1

User Information

NOTE: The Central Heating Control Knob will NOT

operate in the same way as described in the User

Instructions supplied with the boiler !

1. Your installation has been fitted with an Outdoor

Sensor that acts as a Temperature Compensation Device.

2. The Outdoor Sensor enables the boiler to respond

effectively to changes in the ambient temperature outside

the dwelling. 

3. As the outside temperature decreases, the boiler flow

temperature will increase, thus maintaining comfort levels

within the dwelling.

4. Your installer will have set the boiler according to the

anticipated outside temperature range.

5. If you require a different comfort level consult your

installer or follow the instructions in Section 4.0 of this

booklet.

5.0 User Information

Содержание MULTIFIT









Отзывы: