background image

2

© Baxi Heating UK Ltd 2010

1.0

Introduction

3

2.0

Fitting the Outdoor Sensor

4

3.0

Connection

5

4.0

Setting

7

5.0

User Information

8

Section

Page

Contents

© Baxi Heating UK Ltd 2010 

All rights reserved. No part of this publication may

be reproduced or transmitted in any form or by any means, or stored in any
retrieval system of any nature (including in any database), in each case whether
electronic, mechanical, recording or otherwise, without the prior written
permission of the copyright owner, except for permitted fair dealing under
Copyrights, Designs and Patents Act 1988.

Applications for the copyright owner’s permission to reproduce or make other
use of any part of this publication should be made, giving details of the proposed
use, to the following address:

The Company Secretary, Baxi Heating UK Ltd, The Wyvern Business Park, 
Stanier Way, Derby, DE21 6BF.

Full acknowledgement of author and source must be given.

WARNING:

Any person who does any unauthorised act in relation to a

copyright work may be liable to criminal prosecution and civil claims for damages.

The Outdoor Sensor is suitable for use
with the following boilers:- 

Baxi Duo-tec Combi range

Baxi Platinum Combi range

Potterton Promax Combi range

Potterton Gold Combi range

Baxi Megaflo System range

Potterton Promax System range

Содержание MULTIFIT









Отзывы: