25
10.0 Changing Components – Page 25
10.7 Electrode
(Fig. 54 & 55)
1. Disconnect the electrode lead from the tag at the base
of the electrode.
2. Undo the screw retaining the electrode to the burner
tray and withdraw.
3. Fit the new electrode and re-assemble In reverse order.
Check that the spark gap is between 2.5mm and 4.0mm.
10.8 Thermocouple
1. Remove the burner as described in section 10.5.
2. Undo and remove the locknut holding the thermocouple
to the burner tray (Fig. 56).
3. Undo the thermocouple nut from the rear of the gas tap
(Fig. 58) and remove the thermocouple from the burner
tray.
4. Shape the new thermocouple to the existing
thermocouple and fit new thermocouple, reassemble in
reverse order of dismantling.
Supplied by HeatingSpares247.com
