14
6.0
Arranging the Coals – Page 14
6.1 Identification
It is important that all the firebed components are used
and arranged as shown in order to achieve the desired
flame picture. Ensure all firebed components are
present and identified prior to installation.
1. Remove the coals, side cheeks, front and rear coal
mouldings from their protective packaging and place them
on a newspaper or similar to prevent soiling furnishings.
CAUTION: The coals are extremely fragile and must be
handled accordingly. To avoid soiling ones hands,
gloves should be worn and any inhalation of the dust
should be avoided. Keep the coals away from children
at all times. Never use coals other than those supplied
or Genuine Baxi Spare Parts. Never put additional
coals on the fire. Please read
Please read section 1.2 Important Information
2. The side and back brick effect insulation panels can be
reversed to offer a plain effect for the customer. To reverse
this brick effect remove the black sheet metal retaining
pieces left and right hand, carefully remove the three
insulation panels and reassemble with the plain effect on
display. Refit the retaining panels taking care not to
damage the paint and insulation panels.
Supplied by HeatingSpares247.com
