8.
Remove any protective film from the replacement battery and place into the generator.
The negative ( - ) terminal should go in first. The cap of the generator is marked with
( + ).
9.
Refit the battery cover.
10.
Place the fascia over the engine. Make sure
that the top rear of the fascia locates fully into the
‘U’ shaped notch of the engine back panel (See
figure 5).
11.
Fit the control knob firmly on to the control
spindle.
12.
Secure the fascia using the two screws
previously removed. There are two holes in the
fascia. Use the bottom hole.
Regular maintenance.
In order to achieve and maintain high levels of
personal safety and performance efficiency, it is
essential that the opening at the back of the fire and the flue are kept clear of any form
of obstruction. It is possible that deposits of mortar or soot could fall and accumulate
causing the flue to be blocked or restricted and so preventing proper clearance of
dangerous exhaust fumes.
In the United Kingdom it is the law that a landlord must have any gas appliance, flue
and pipework which is situated in a tenant’s premises checked for safety at least every
twelve months by a competent person (In the U.K., a CORGI registered installer).
We recommend that all gas appliances and their flues, wherever situated, are checked
annually.
Servicing.
!
Servicing can be carried out either by a Baxi Fires Division Service engineer or a
CORGI registered installer.
!
If you require your fire to be serviced, please contact
Baxi Fires Division Service
on
08706 090 081
IMPORTANT
To help us quickly help you, please try to have the following information available
before you contact us:
!
Type of fire.
!
Model/Name.
!
Serial Number.
You will also be asked for the fault, problem or request plus your Post Code.
Page 11
OWNER GUIDE
©
Baxi Heating U.K. Limited 2006.
Figure 5. Fascia top location