Baxi BOSTON 40 OF, Инструкции по установке и обслуживанию

Страница: 8 / 33

F ­ 1 off ­ 145mm long ­ 22mm copper tube
G ­ 1 off ­ 42mm long ­ 22mm copper tube
The redundant flow connection(s) must be plugged.
Accuracy is important to avoid the pump and or pipework obstructing removal of the top panel of
the combustion chamber, or fouling the top panel of the outer case.
OUTER CASE ( Fig 6 )
Assemble the outer case in the following manner:
1) Locate the RH side panel over the pegs at the RH side of the base and press downwards to
secure. When fitting the panels if access is restricted the cutouts at the top of the back edge of the
panels. can be used to pass the case fixing brackets.
2) Secure the panel to the case fixing brackets with two of the six screws provided.
3) Repeat 1 & 2 with the LH side panel.
4) Secure the hinges of the facia panel to the two side panels using two of the six screws provided.
5) At this point the electrical connections to the facia panel can be made and the appliance can be
commissioned. (See '
Electrical Connections ' and ' Commissioning the Appliance ' ).
6) Swing the facia panel upwards and secure to the side panels using the two screws retained to
the control facia.
7) Lift trim clear of flue connection on the boiler and locate the top panel on the top of the side
panels and press down to secure. Re­position the trim in the cutout on the top panel.
8) Hook the bottom edge of the front panel over the lugs on the base and swing the top edge back
till the pegs at the top of the panel locate in the corresponding holes. Press to secure.
GAS CONNECTION ( Fig 3 )
Adapt the gas supply 15mm (1/2 in BSP) within the outer case making the gas connection to the
service tap provided.