Baxi BC ACS 150 SPLIT, Инструкция по установке и обслуживанию

Страница: 18 / 64

4 Description of the product
4.1 General description
The thermodynamic water heaters in the BC ACS Split range have the
following specifications:
Accumulation domestic hot water tank,
Heat pump extracting energy from the outside air,
Control panel with timer programming,
1600 W shielded immersion heater,
Glass-lined tank protected by magnesium anode,
Very thick insulation (0% CFCs).
The magnesium anode can be replaced by an impressed current anode
available as optional equipment (package AJ38).
4.2 Limit temperatures of the thermodynamic water heater
X Air temperature (°C)
Y Domestic hot water temperature (°C)
The graph opposite shows the maximum temperature at which the outdoor
unit can heat up the water in the domestic hot water tank according to air
temperature.
To preserve the components and maintain an optimal service life of the
thermodynamic water heater, the outdoor unit works at temperatures of
between -15°C and +42 °C. Outside of this temperature range, the surplus
heating of the domestic hot water is provided by the immersion heater.
4.3 Standard delivery
The thermodynamic water heater is delivered in several packages:
Contents of the domestic hot water tank package Contents of the outdoor unit package
The domestic hot water tank The outdoor unit
The documentation bag The accessories box
Documentation bag
Accessories
An installation and service manual
A user guide
Accessories box
A condensates recovery pipette
A condensates discharge pipe
A control panel with wall bracket and all mounting screws and plastic dowels
A domestic hot water tank temperature sensor with 20 metres of cable
A 20-metre control panel connection cable
Fig.6
MW-4000102-3
40
35
-15 -10 -7
2 32 43 37
X
58
55
60
62
65
Y
-2
4 Description of the product
18 7689749 - v03 - 25112019