manualshive.com logo in svg

Baxi BC ACS 150 SPLIT, Инструкция по установке и обслуживанию

Поделиться
Скачать
Baxi BC ACS 150 SPLIT Скачать руководство пользователя страница 56

12  Disposal and recycling

12.1  Switching the thermodynamic water heater off

1. Power off the thermodynamic water heater before any interventions 

on the appliance. 

2. Disconnect the water supply to the domestic hot water tank.

3. Drain the domestic hot water tank.

12.2  Disposing and recycling

The thermodynamic water heater must be dismantled and scrapped by a 

qualified professional in accordance with prevailing local and national 

regulations.

1. Switch the thermodynamic water heater off.

2. Recover the refrigerant from the installation.

3. Dismantle the domestic hot water tank and the outdoor unit.

4. Scrap or recycle the domestic hot water tank and the outdoor unit in 

accordance with local and national regulations.

For more information, see

Switching the thermodynamic water heater off, page 56

Recover the refrigerant fluid in the outdoor unit, page 48

Fig.57

MW-4000184-1

OFF

Fig.58

MW-3000179-03

12 Disposal and recycling

56

7689749 - v03 - 25112019

Содержание BC ACS 150 SPLIT

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды