Baxi BC ACS 150 SPLIT, Инструкция по установке и обслуживанию

Страница: 47 / 64

10 Maintenance
10.1 General
Caution
Do not neglect to service the domestic hot water tank or the heat
pump. Contact a qualified professional or take out a maintenance
contract for the obligatory annual servicing of the thermodynamic
water heater.
Failure to service the appliance voids the warranty.
The control and maintenance interventions for the appliance must be
performed by a certified professional in accordance with prevailing
statutory texts and codes of practice.
Maintenance operations are important for the following reasons:
To guarantee optimum performance;
To extend the life of the equipment;
To provide an installation which offers the customer optimum comfort
over time.
Power off the thermodynamic water heater before any interventions on the
appliance.
Remove the thermodynamic water heater casing only to perform
maintenance and repair work.
Put the casing back in place after maintenance and repair work.
10.2 Maintenance operation intervals
The maintenance form is available in the appendix.
Tab.20 General maintenance
Operation Periodicity Installer User
Operate the safety valve or unit once a month X
Tab.21 Outdoor unit maintenance
Maintenance operations on the outdoor unit Periodicity Installer User
Clean the casing using a damp soft cloth once a year X
Check the cleanliness of the outdoor unit fan once a year X
Tab.22 Maintenance of the domestic hot water tank
Operations Periodicity Installer User
Clean the casing using a damp soft cloth once a year X
Descaling the domestic hot water tank after the first year of use
and then every two years
X
Checking the magnesium anode after the first year of use
and then every two years
X
10.3 Operate the safety valve or unit
To take the proper precautions against possible pressure surges which
would damage the domestic hot water tank, ensure the safety valve or unit
functions correctly. Failure to follow this maintenance requirement may
lead to damage of the domestic hot water tank and void its warranty.
1. Operate the safety valve or unit at least once a month.
2. Replace the safety valve or unit if necessary.
Fig.50
MW-4000184-1
OFF
10 Maintenance
7689749 - v03 - 25112019 47