Baxi AS 300-2E BC, Инструкция по установке, эксплуатации и обслуживанию

Страница: 15 / 32

AS 300–2E BC
E 1743.5
F 1845.5
G (Ø) 605
K 537
4.4 Positioning the appliance
Caution
Have 2 people available.
Handle the appliance with gloves.
1. Remove the packaging from the calorifier but leave the calorifier on
the shipping pallet.
2. Remove the protective packaging.
3. Remove the three screws securing the tank to the pallet.
4. Lift the tank and place it in its final position, respecting the distances
shown on the diagram.
4.5 Levelling the domestic hot water tank
The domestic hot water tank is levelled using the three feet (supplied in
the bag) to be screwed to the bottom of the domestic hot water tank.
1. Screw the three adjustable feet to the bottom of the domestic hot
water tank.
2. Level the appliance using the adjustable feet.
Adjustment range: 10 mm.
Use metal blocks under the feet of the tank if necessary.
Caution
Do not place the blocks on the exterior sides of the domestic hot
water tank.
4.6 Fitting the temperature sensors
1. Position the probe in the sensor tube, using the sensor tube
separator.
The sensor tube separator is provided in the documentation bag.
2. Check that the probes are correctly positioned in the sensor tube.
3. Check the mounting of the sensor tube separator.
For more information, see
Main dimensions, page 14
Fig.5
MW-5000828-2
350
200
2
0
0
Fig.6
L000382-A
1
2
Fig.7
L
0
0
0
3
8
3
-A
1
2
3
4 Installation
7724479 - v03 - 07102019 AS 300–2E BC 15