Baxi 44 075 03 Скачать руководство пользователя страница 25

Страница: 25 / 32

Supplied By www.heating spares.co Tel. 0161 620 6677

9.0 Changing Components

9.10

Pilot/A.S.D. Assembly

WARNING:

The Pilot/A.S.D. Assembly should

not be adjusted in anyway. The A.S.D. must

not be altered so that it will not operate or be

bypassed in anyway. The complete assembly

must be replaced in the event of one or other

component failure(s). Only use a Genuine Baxi

Spare Part.

1. Remove the ignition and sensing leads from the

A.S.D. electrodes (Fig. 64). Undo the pilot feed

pipe at the A.S.D. (Fig. 63 & 64).

2. Undo the screw holding the A.S.D. bracket to

the burner mounting plate and disengage the tab

on the bracket from the plate. Undo the screw

holding the A.S.D. to its bracket (Fig. 63).

3. Fit the new A.S.D. onto the bracket (Fig. 64)

and connect the ignition and sensing leads to their

electrodes.

4. Engage the tab on the A.S.D. bracket in the

hole in the burner mounting plate. Ensure that the

pilot aeration tube seal sits in the recess in the

sensing pipe adaptor. Refit the retaining screw.

5. Reassemble in reverse order.

9.11

Ignition Lead

1. Remove controls heat shield.

2. Remove the three screws securing the controls

box cover and remove the electrode lead from its

terminal on the PCB and the electrode. The lead

has a black sleeve at the electrode end

(Fig. 64 & 65).

3. Reassemble in reverse order.

9.12

Flame Sensing Lead

1. Remove controls heat shield.

2. Remove the three screws securing the controls

box cover and remove the electrode lead from its

terminal on the PCB and at the sensing probe

end. The lead has a white sleeve (Fig. 64 & 65).

3. Reassemble in reverse order.

Flame Sensing Lead

Ignition Lead

Control Box Cover

Control Box

Flame Sensing Lead

(white sleeve)

Ignition Lead

(black sleeve)

Pilot / A.S.D. Assembly

Pilot Feed Pipe

Sealing Washer

A.S.D. Bracket

Fig. 63

Fig. 64

Fig. 65

Fig. 66

Содержание 44 075 03

































Результаты поиска

Содержание 44 075 03

Отзывы:

Бренды по названию

Популярные бренды

Baxi 44 075 03, Руководство пользователя

Результаты поиска

Содержание 44 075 03

Отзывы:

Бренды по названию

Популярные бренды