manualshive.com logo in svg

Baxi 44 075 03, Руководство пользователя

Поделиться
Скачать
Baxi 44 075 03 Скачать руководство пользователя страница 21

Supplied By www.heating spares.co  Tel. 0161 620 6677

8.0 Annual Servicing

21

8.7

Cleaning the Heat Exchanger

1. Remove the top and the centre baffles from

the heat exchanger, noting their orientation

(Fig. 43).

2. Remove the side and rear insulation pieces by

undoing the screws retaining the support

brackets and sliding the rear bracket to the left

and both side brackets forward (Fig. 44, 45,46 &

47).

3. Each bracket may then be removed along with

the insulation. 

4. Clean between the heat exchanger fins and

flueways with suitable brushes and remove any

deposits from the combustion box base tray. 

5. Clean away any lint or other deposits from the

boiler hood and builders opening.

6. Reassemble the insulation in reverse order

and refit the baffles. 

7. Reassemble the appliance in reverse order,

re-greasing the thermostat phial if required.

8. Re-commission the appliance and check for

gas soundness.

9. Complete the relevant section of the

“

Benchmark

”

 Installation, Commissioning and

Service Record Log Book and hand it back to

the user.

Slide Rear Insulation

Bracket Left Before

Pulling Forward

Heat Exchanger

Baffles

Undo the Retaining

Screws on the Support

Brackets

Remove each Bracket

and Insulation

Fig. 43

Fig. 44

Fig. 45

Fig. 46

Fig. 47

Содержание 44 075 03

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды