Baxi 11i, Инструкция по установке, эксплуатации и обслуживанию

Страница: 4 / 12

4
GENERAL SAFETY WARNINGS
The Operation Manual is an integral part of the product and so must
be carefully preserved in order to accompany the product; if it is
lost or damaged another copy can be requested from the Technical
Assistance Centre.
The installation of the device and any other repairs or mainte-
nance must be performed by qualified personnel according to
the law in force, in compliance with the installing regulations
including any revisions.
It is recommended that trained personnel install the device.
The device must be used according to the manufacturer spe-
cifications. The manufacturer cannot be held contractually or
otherwise responsible for damage caused to persons, ani-
mals or objects as a result of incorrect installation, repair or
maintenance or improper usage.
The product’s safety or automatic regulation devices must not
be modified unless performed by the manufacturer.
This device is intended for heating water and therefore must
be connected to a water distribution network who’s load and
settings are compatible with the product.
If water spills, turn off the water supply and advise the quali-
fied personnel at the Technical Assistance Centre.
If the machine is not used for prolonged periods turn off the
gas supply. If there is a risk of the water freezing, empty the
water heater.
If the machine breaks down or does not function properly,
deactivate it, do not attempt to perform any repairs.
The machine’s maintenance must be performed at least once
a year: Book a maintenance session with the Technical Assi-
stance Centre ahead of time to save wasting time and money
afterwards.
The water heater package contains:
2 Two knobs to attach to the control panel after installation
1 Water filter to insert in the water valve pipe fitting.
1. TECHNICAL CHARACTERISTICS
1.a Technical Data
When using the device the following safety rules must be applied:
Do not use the machine for purposes other than those inten-
ded by the manufacturer.
Do not block the intake and dissipation grills or the ventilation
openings in the area where the device is installed with rags,
paper or any other materials.
If a gas leak is detected, do not switch on any electrical de-
vices, telephones or any other objects that could produce a
spark. Ventilate the area by opening the doors and windows
and switch off the gas supply.
Do not place objects on top of the device.
Do not leave flammable containers or substances in the area
where the device is installed.
Do not attempt to repair the machine if it breaks down and/or
works incorrectly.
Children or inexperienced persons are prohibited from using
the device.
It is prohibited to open sealed elements.
To maintain the proper functioning of the device:
- Periodically clean the devices exterior with soapy water, this im-
proves its appearance as well as preserving it from corrosion in
the long term.
- Do not use solvents, powders or abrasive sponges.
- Do not clean the device and/or its parts with flammable materials
(e.g. petrol, alcohol, diesel etc.).
Baxi 11i Baxi 14i
kW kcal/h kW kcal/h
Nominal power usage (Pn)
19,0 16.340 23,7 20.374
Nominal Thermal range (Qn)
21,8 18.748 27,2 23.392
Minimal power usage (Pm)
7,5 6.424 7,5 6.424
Minimal Thermal range (Qm)
9,0 7.740 9,0 7.740
GAS TYPE
METHANE GAS LIQUID GAS METHANE GAS LIQUID GAS
G20 G30 G31 G20 G30 G31
P.C.I. (15° C 1013 mbar) MJ/m3 34,02 116,09 88 34,02 116,09 88
WI (15° C 1013 mbar) MJ/m3 45,67 80,58 70,69 45,67 80,58 70,69
Nominal feed pressure mbar 20 28-30 37 20 28-30 37
Consumption m3/h 2,31 - - 2,88 - -
kg/h - 1,72 1,69 - 2,14 2,11
Burner Pressure mbar 12,20 27,50 35,10 13,00 27,00 34,30
Ø pilot flame nozzle mm 0,35 0,25 0,35 0,25
Ø main burner nozzle mm 1,18 0,71 1,18 0,72
nozzles N. 11 13
Ø gas connection 1/2” 1/2”
Maximum flue gas load g/s 13,20 12,40 13,00 18,40 17,70 19,00
flue gas temperature °C 185 180 182 168 163 158
Category II2H3+
WATER Baxi 11i Baxi 14i
Input range l /min
select. min.
da 2,5 a 5
select. max
da 5 a 10,8
select. min.
da 2,5 a 6,7
select. max
da 6,7 a 13,6
Water temperature elevation °C approximately 50 approximately 25 approximately 50 approximately 25
Minimum pressure bar 0,2 0,2
Nominal pressure bar 2 2
Maximum pressure bar 10 10
Ø Water connections 1/2” 1/2”
Ø flue gas release tube mm 110 130
DIMENSIONS AND WEIGHTS
DEVICE PACKAGE DEVICE PACKAGE
Height mm 592 655 650 713
Length mm 314 361 363 410
Depth mm 245 280 245 280
Weight Kg 11,10 13,10 12,60 15,10
Note: relative cold water temperature of 15 °C