manualshive.com logo in svg

Baxi Fires Division 939, Руководство по установке

Поделиться
Скачать
Baxi Fires Division 939 Скачать руководство пользователя страница 6

Description

Part Number

Blenheim Firefront (16 inch Fret)

! 

Brass effect 

9800040

! 

Antique (Black & Brass effect) 

9800075

! 

Chrome effect 

9800076

! 

Black Cast Iron with Brass Finials 

9800039

Blenheim Firefront (18 inch Fret)

! 

Brass effect 

9800082

! 

Antique (Black & Brass effect) 

9800083

! 

Chrome effect 

9800084

! 

Black Cast Iron with Brass Finials 

9800081

3. APPLIANCE DATA

This product uses fuel effect pieces containing Refractory Ceramic Fibres (RCF),
which are man-made vitreous silicate fibres. Excessive exposure to these materials
may cause irritation to eyes, skin and respiratory tract. Consequently, it is
important to take care when handling these articles to ensure that the release of
dust is kept to a minimum. To ensure that the release of fibres from these RCF
articles is kept to a minimum, during installation and servicing we recommend that
you use a HEPA filtered vacuum to remove any dust and soot accumulated in and
around the fire before and after working on the fire. When replacing these articles
we recommend that the replaced items are not broken up, but are sealed within a
heavy duty polythene bag, clearly labelled as RCF waste. RCF waste is classed as a
stable, non-reactive hazardous waste and may be disposed at a landfill licensed to
accept such waste. Protective clothing is not required when handling these articles,
but we recommend you follow the normal hygiene rules of not smoking, eating or
drinking in the work area and always wash your hands before eating or
drinking.This appliance does not contain any component manufactured from
asbestos or asbestos related products.

This appliance does not contain any components manufactured from asbestos or
asbestos related products.

There are no specific thermal efficiency requirements appropriate to this type of
appliance as they are intended for decorative purposes only. For the purposes of SAP the
efficiency is classed as 20% for use in the Space Heating Requirements calculation, see
Table 4a of SAP.

Page 6

INSTALLER GUIDE

© 

Baxi Heating U.K. Limited 2006.

Содержание 939



























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды