6.3.2
Burner Positioning
The two tags at the side of the burner can be folded
against the side of the burner tray. This may be required
for installations where the width of the fireplace
opening is restricted (See figure 6)
For installations without the 'Liberty' casting
!
Place the burner unit centrally within the fireplace
opening. Position the burner to the rear
of the opening, this may be moved
forward providing the front of the burner
tray does not protrude beyond the front
plane of the fireplace opening by more
than 33mm (See figure 7).
For installations with the 'Liberty'
casting
!
Place the casting centrally within the
fireplace opening. Position the casting to
the rear of the opening. The casting may
be moved forward providing the inner
front curve of the casting does not
protrude beyond the front plane of the
fireplace opening by more than 33mm
(See figure 8).
Page 15
INSTALLER GUIDE
Figure 8. Liberty casting positioning
Figure 7. Burner positioning
Figure 6. Burner tags
