bautek Fluggeräte Kite, Руководство по эксплуатации

Страница: 6 / 17

-5-
Then the steel ring of the rear upper rigging placed in the same notch. Check if the
snap behind both rings is out and secures them.
In the front the two nose wires of the lower rigging are combined with a small screw
closed triangle. Hang the triangle into the receptacle under the nose plate and again
confirm that the snap secures it.
After this attach the snap hook of the spreader-bar safety cable from below = upwards
into the tensioning line eye at the spreader bar; the zipper of the double sail is closed
after this.