Baumuller BUM 60 Скачать руководство пользователя страница 38

Страница: 38 / 84

WARNING!

Danger as a result of faulty mounting!

The mounting requires qualified personnel with adequate experience. Faulty mount-
ing can lead to life-threatening situations or substantial material damage.

Therefore:

Only allow mounting to be performed by employees of the manufacturer or by oth-
er qualified personnel.

WARNING!

Danger of mechanical impact!

Secure devices against falling down.

Therefore:

Use appropriate means of transport.

NOTICE!

Danger due to electrostatic discharge.

The connecting terminals of the device are partially at risk due from ESD.

Therefore:

Please heed the respective notes.

CAUTION!

Danger due to sharp edges.

If the device is lifted with unprotected hands during mounting, palms or fingers can
be cut. If the device falls, feet could be injured.

Therefore:

Ensure that only qualified personnel, who are familiar with the safety notes and as-
sembly instructions, mount this device.

Wear safety gloves.

Wear safety shoes.

Safety notes

Instruction handbook BUM 60 / BUS 60

Document No.: 5.01032.05

Baumüller Nürnberg GmbH

of 82

6.1

Содержание BUM 60





















































































Результаты поиска

Содержание BUM 60

Отзывы:

Похожие инструкции для BUM 60

Бренды по названию

Популярные бренды

Baumuller BUM 60, Инструкция по эксплуатации

Результаты поиска

Содержание BUM 60

Отзывы:

Похожие инструкции для BUM 60

Бренды по названию

Популярные бренды