Baumuller BM5-SSL, Инструкция по эксплуатации, Страница: 60 / 80

Function test
Instruction handbook Safe STO logic BM5-SSL
Document No. 5.18007.02 Baumüller Nürnberg GmbH
60
of 78
10.1
10.1 Function test
The function test is a major part of the validation of the entire system. The function test is
used to determine the trouble-free allocation of the network safety components and the
programmed logic of the system.
Depending on the complexity of the logic circuit of the respective project, it is
recommended to conduct the function tests in steps.
The following course of action is recommended when conducting the function tests:
1 Only connect the actuators and drives to the safe output terminals once no errors have
been detected in the inspection of the logic circuit.
2 Conduct a complete function test with all sensors (initiators), switches, actuators and
drives.
To conduct the function tests, trigger all safety functions sequentially and document the
system's reaction. Check whether their action corresponds with the expected behavior.