manualshive.com logo in svg

Baumuller BM5-SSL, Инструкция по эксплуатации, Страница: 16 / 80

Поделиться
Скачать
Baumuller BM5-SSL Скачать руководство пользователя страница 16

Intended use

Instruction handbook 

Safe STO logic

 BM5-SSL

Document No. 5.18007.02

Baumüller Nürnberg GmbH

16

of 78

3.3

3.3

Intended use

Das 

BM5-SSL

 ist ausschließlich für den hier beschriebenen bestimmungsgemäßen Ver-

wendungszweck konzipiert und konstruiert.

Sie verwenden das Gerät dann bestimmungsgemäß, wenn Sie alle Hinweise und Infor-
mationen dieser Betriebsanleitung beachten.

WARNING!

Danger due to use other than intended!

Any use of the device different from and/or exceeding beyond the scope of the 
intended use can lead to dangerous situations.

Therefore:

m

Only use the 

BM5-SSL

 as intended.

m

Follow all specifications of this operation manual.

m

Ensure that exclusively qualified personnel work on or with the 

BM5-SSL

.

m

Take care in project planning to see that the 

BM5-SSL

 is always used within its 

specifications.

m

Ensure that the power supply meets the required specifications.

m

Only operate the 

BM5-SSL

 if it is in technically faultless condition.

m

Only use the 

BM5-SSL

 in combination with components approved by Baumüller 

Nürnberg GmbH.

3.4

Operator responsibility

The 

BM5-SSL

 is implemented in an industrial zone. The operator of the device is thus 

subject to the legal work safety obligations.

In addition to the work safety instructions in this operation manual, the safety, accident 
prevention and environmental protection regulations applicable to the area of application 
of this device must also be complied with. In doing so, the following applies in particular:

m

The operator must inform himself of the applicable work safety regulations and 
additionally ascertain hazards arise through the special work conditions at the place of 
use of the device in a risk assessment. The operator must implement this in the form 
of operation instructions for the operation of the device.

m

This operation manual must be kept in the immediate vicinity of the device and be 
accessible to persons working on and with the device at all times.

m

The statements of the operation manual are to be followed completely and absolutely!

m

The device may only be operated in technically faultless condition and must be safe for 
operation.

Содержание BM5-SSL

















































































Отзывы:

Нет отзывов