NE214
www.baumer.com
51
6.1 Dimensions
6.2 Default settings
The following parameters are programmed into the counter by the
factory, prior to delivery:
Preset value, main counter P1
100
Preset value, main counter P2
1000
Start count value
0
Scaling factor, main counter XP
1.0000
Display
No decimal point
Pulse signal time, main counter
0.25 s
Counting mode
Operating mode 0 (stage preset)
Inputs, main and totalizing counter Track A and UP/DOWN on track B
Change of preset
Effective immediately
Counting frequency
10 kHz
6.3 Error messages
Fault must be rectified by the factory.
Excessively fast sequences, e.g. inadequate intervals between
presets at high counting frequency; counting frequency for track A or
B too high.
●
Error message
can be cleared with the
key.
