35
Examples
11.5.2
11.5.2.1 Sequencer without Machine Cycle
Sequencer
Start
A
A
B
B
C
C
The figure above shows an example for a fully automated sequencer with three sets of
parameters (A,B and C). Here the repeat counter (n) is set for (A=5), (B=3), (C=2) and the
loop counter (m) has a value of 2.
When the sequencer is started, with or without an external event, the camera will record
the pictures using the sets of parameters A, B and C (which constitutes a sequence).
After that, the sequence is started once again, followed by a stop of the sequencer - in this
case the parameters are maintained.
11.5.2.2 Sequencer Controlled by Machine Steps (trigger)
A
A
B
B
C
C
Trigger
Sequencer
Start
The figure above shows an example for a half-automated sequencer with three sets of
parameters (A,B and C) from the previous example. The
frame counter (z) is set to 2. This
means the camera records two pictures after an incoming trigger signal.
Capability Characteristics of
11.5.3
Baumer-GAPI Sequencer Module
up to 128 sets of parameters
▪
up to 4 billion loop passes
▪
up to 4 billion repetitions of sets of parameters
▪
up to 4 billion images per
▪
trigger event
free running mode without initial
▪
trigger
◄ Figure 32
Example for a fully auto-
mated sequencer.
◄ Figure 33
Example for a half-auto-
mated sequencer.
Содержание HXG
Страница 1: ...Baumer HXG Release 2 User s Guide for Dual Gigabit Ethernet Cameras with CMOSIS Sensors...
Страница 2: ...2...
