Baumer HXC13, Руководство пользователя

Страница: 9 / 38

9
CameraLink 2.2.
®
Interface
CameraLink
®
is designed for digital cameras in machine vision applications. A "Full Cam-
eraLink
®
" interface can transfer up to 80 bits of data at a rate of max. 680 Mbytes/sec.
Serial Interface 2.3.
The communication via the serial interface is incorporated in the "Base CameraLink
®
"
interface.
Pin-Assignment 2.4.
Base CameraLink
®
Full CameraLink
®
Pin Signal Pin Signal Pin Signal Pin Signal
1 GND 14 GND 1 GND 14 GND
2 X0- 15 X0+ 2 Y0- 15 Y0+
3 X1- 16 X1+ 3 Y1- 16 Y1+
4 X2- 17 X2+ 4 Y2- 17 Y2+
5 XCLK- 18 XCLK+ 5 YCLK- 18 YCLK+
6 X3- 19 X3+ 6 Y3- 19 Y3+
7 SERTC+ 20 SERTC- 7 100 Ω term. 20 100 Ω term.
8 SERTFG- 21 8 Z0- 21 Z0+
9 CC1- 22 CC1+ 9 Z1- 22 Z1+
10 CC2+ 23 CC2- 10 Z2- 23 Z2+
11 CC3- 24 CC3+ 11 ZCLK- 24 ZCLK+
12 CC4+ 25 CC4- 12 Z3- 25 Z3+
13 GND 26 GND 13 GND 26 GND
Power Supply
Power VCC 8 VDC ... 24 VDC
Power Consumption 5 W
Power Supply
1
2
3 4
5
6
Pin Signal Pin Signal Pin Signal
1 (white) VCC 3 (green) STRB 5 (grey) GND
2 (brown) VCC 4 (yellow) DGND
1
6 (pink) GND
1
DGND - digital GND for signal STRB
Notice
Before applying power to the camera we strongly recommend to verify the used pins of
the power connector, the polarity (+/-) of the leads and the supply voltage.
The camera may only be used with a supply voltage according to the camera speci-
fication (8 VDC .. 24 VDC). Connecting a lower or higher supply voltage, AC voltage,
reversal polarity or using wrong pins of the power connector may damage the camera.
If doing so, the warranty will expire immediately.