Baumer HXC13, Руководство пользователя

Страница: 18 / 38

18
Output Mode 5.5.
CameraLink 5.5.1.
®
Output Mode
Command
:M<x>
<x> = 0 ... 6
:M?
Response
--*
* ACK/NAK if acknowledge on
<x>
current value
Description This command selects the camera output mode.
For example the mode 0 delivers 2 taps with 8 bit.
Mode Description CameraLink
®
Configuration Pixelclock Remark
0 2x8 base 80 MHz
1 2x10 base 80 MHz
2 16x1 base 80 MHz
optional feature,
binarization
3 2x8 base 80 MHz
optional feature,
mask mode
4 4x10 medium 80 MHz
5 8x8 full 80 MHz
6 10x8 full 75 MHz
Set Pixelclock 5.5.2.
Command
:R<xx>
<xx> = 3c
hex
, 41
hex
, 46
hex
, 4b
hex
, 50
hex
:R?
Response
--*
* ACK/NAK if acknowledge on
<x>
current value
Description This command selects the pixelclock of the CameraLink
®
in-
terface. As default all modes work with a pixelclock of 80MHz.
(Except of mode 6 with 75MHz). With this setting the full speed
of the camera can be achieved. The clock can be adjusted in 5
MHz steps from 60…80MHz.
Application Under some circumstances it is helpful to reduce the clock. This
is the case if the framegrabber can’t accept fast pixelclock or
if a long or poor cable is used. Note that a reduced pixelclock
results in a lower maximal framerate. This can be checked with
the framerate command.
Notice
In mode 6 the value 50
hex
is not valid.