Baumer HUBNER BERLIN HMG10, Руководство по эксплуатации

Страница: 27 / 52

Baumer Hübner Electrical installation | 6
V1, T1 | HMG10 & HMG10P DeviceNet Operating Manual 27
6.1 DeviceNet
6.1.1 DeviceNet features
INFO
Detailed instructions for the DeviceNet interface as well as the EDS file can be found on the
Baumer website
www.baumer.com .
Fieldbus protocol DeviceNet
Device profile Device Profil for Encoders V 1.0
Operating modes I/O-Polling
Cyclic
Change of State
Preset value With the parameter "Preset" the device can be
set to a desired actual value, which corre-
sponds to a defined axis position of the sys-
tem. The offset value between device zero
point and mechanical zero point is stored in the
device.
Parameter functions Direction of rotation:
Whether the output should deliver increasing or
decreasing values according to the selected
sense rotation can be configured in the operat-
ing parameters.
Scaling:
Steps per revolution and total resolution can be
configured.
User address Factory setting: 00