Baumer HUBNER BERLIN HMG10, Руководство по эксплуатации

Страница: 30 / 52

6 | Electrical installation Baumer Hübner
30 Operating Manual HMG10 & HMG10P DeviceNet | V1, T1
f) Connect cable shield to cable gland and make sure it covers a large area.
g) Attach the cable gland to the terminal box.
h) Mount the terminal box at the encoder. To do this, tighten the screws with a torque of 2-3
Nm.
6.1.3 Pin assignment DeviceNet
1 2
Ill. 5: Connections HMG10 DeviceNet
1 Mating connector (5-pin, A-coded) 2 Mating connector (5-contact, A-coded)
6.1.3.1 Mating connector (5-pin, A-coded)
1 2
3 4
5
Ill. 6: Mating connector (5-pin, A-coded)
Pin Connection Description
1 DRAIN Shield connection
2 UB Operating voltage 10-30 V DC
3 GND Ground connection for UB
4 CAN_H CAN Bus Signal (dominant
HIGH)
5 CAN_L CAN Bus Signal (dominant
LOW)