Baumatic BMEH94E1G, Инструкция по использованию и установке

Страница: 7 / 32

7

Incorrect connection may destroy parts of the appliance, making the warranty void.

Connection cable on the back of the appliance should be led in such way that it does not
touch the appliance back wall, as this part will get very hot during operation.
Connecting The following cables can be used for connection:
• H05GG-F
CONNECTING TO THE GAS SUPPLY

WARNING : these tasks may only be carried out by a qualified technician, authorized by the gas distributing company or
authorized service center!

The appliance must be connected in compliance with all relevant regulations, and it may only be used in well ventilated /
aerated rooms.

The category with the related types of gas can be used are included in Table ʺ ADAPTATION TO A DIFFERENT
TYPE OF GAS ʺ
.

This appliance is not suitable for connection to a burning fumes exhaust system (i.e. a chimney).

CAUTION: The gas cooking appliance use may cause heat, humidity and products of combustion in the room where is
installed. Ensure that the kitchen is well ventilated especially when the appliance is in use: keep open any natural
ventilation holes or install a mechanical ventilation device (mechanical extractor hood). Prolonged intensive use of the
appliance may call for additional ventilation, for example opening of a window, or more effective ventilation, for example
increasing the level of mechanical ventilation where present. Special care must be taken to ensure adequate ventilation /
aeration (
a = min. 100 cm
2
).
Connection

When connecting the appliance to the gas supply, follow the regulations of the local gas
distributor.

On the lower side, the cooking hob is fitted with a gas connection plug with a thread.

When connecting, the knee should be held firmly to prevent it from rotating.

For sealing of the connection joints, use a non-metal approved gaskets and approved
sealants.

The gaskets should only be used once. The thickness of the flat non-metal gaskets should
not be deformed more than by 25 percent.

To connect the appliance to the gas supply, use a tested and certified flexible hose.

The flexible connection hose should be able to move freely.

It should not come into contact with the movable parts of the furniture or the bottom of the
cooking hob.

If an electric oven is built into the kitchen element under the cooking hob, it should be fitted
with a cooling fan.

After connecting the gas hob, check the joints for any leaks.