Baumatic BHI340SS, Инструкция по эксплуатации

Страница: 14 / 32

Residual heat indicator
o
After a zone is switched off, the corresponding
cooking zone indicator
(8) will show the letter “H”.
This means that the temperature of the zone is
over 60°C and is therefore high enough to cause
injury.
o
When the temperature falls below 60°C, then the letter “H” and
“0” will stop alternating (if the hob is still switched on), or the
“H” will go out (if the hob is not switched on).
o
IMPORTANT: The residual heat indicator will disappear if your
mains supply is cut.
Locking the hob top
o
The whole hob top can be locked by pressing the safety lock
button
(2) whilst the appliance is turned on.
o
The safety lock neon (6) will light to show that the safety lock
feature has been switched on.
o
When the safety lock feature is activated, it will disable any of
the other buttons on the control panel, except the ON/OFF
button
(1) .
o
To disable the safety lock feature, you should press the safety
lock button
(2) again. The safety lock neon (6) will go out and
you are then able to adjust the power of any zone on the hob
top.
o
IMPORTANT: If the appliance is switched off whilst the safety
lock feature is activated, then it will still be activated the next
time that you turn the appliance on. Therefore before you can
turn on a zone and set it to a power level, you will need to
deactivate the safety lock by pressing the safety lock button
(2) .
14