background image

 

31 

Motor hums 

If the dishwasher is not going to be 

used for a period of time, then you 
should make sure that the appliance 

is set on a wash program once a 
week. Otherwise the seal around the 

motor may dry out and cause noise. 

Suds in the 
tub 

Improper detergent 
use 

 
 
 

Spilled rinse aid 

Ensure if you are using 3 in 1 
detergent tablets, in conjunction with 

rinse aid and salt that the levels are 
set correctly. 
 

Always wipe up any excess rinse aid 
or rinse aid spillages immediately. 

Stained tub 
interior 

Detergent with  
colourant was used 

Use a detergent without colourant. 

Dishes are not 

fully dried 

Rinse aid dispenser is 

empty 

Make sure that the rinse aid 

dispenser is filled with rinse aid. 

Dishes and 
pans are not 

clean 

Improper program 
 

 
Improper loading 

Select a more intense wash program. 

 

 
Make sure that the spray arms and 

the detergent dispenser are not 
being impeded by large dishes. 

Spots and 

filming on 
glasses and 

pans 

Extremely hard water 

Low inlet 
temperature 

Improper loading 
Improper detergent 

Incorrect salt/rinse 
aid levels 

 

 
Refer to the relevant sections of this 

booklet, to ensure that the 
detergent, salt and rinse aid levels 

are set correctly. Ensure that the 
appliance is loaded correctly. 

Steam 

A normal 

phenomenon 

You may get a small amount of 

steam coming through the vent by 
the door latch, during drying and 

water draining. 

Black or grey 
marks on 
dishes 

Aluminium utensils 
have rubbed against 
dishes 

Use a mild abrasive cleaner to 
eliminate the marks. Make sure that 
the appliance is loaded correctly in 

future. 

Water 

standing in 
the bottom of 

the tub 

This is normal 

A small amount of clean water in the 

base of the appliance is not 
something to be concerned about. 

Dishwasher 

leaks 

The rinse aid 

dispenser is 
overfilled or rinse aid 

has been spilt inside 
the appliance 
 

 
Dishwasher isn’t 

level 

Take care not to overfill the rinse aid 

dispenser. Spilt rinse aid could cause 
oversudsing and lead to overflowing. 

Wipe away any spills immediately 
with a damp cloth. 
 

 
Make sure that the dishwasher is 

level. 

 
 
 

Содержание BDWS45SS

















































Отзывы: