USER INSTRUCTIONS
ADDING RINSE AID
This avoids water stains on the items and improves the drying process.
•
Put the door in the horizontal position.
•
Unscrew and remove the container cap in the inner door (see Fig. 2).
•
Fill the container with rinse aid up to the indicated maximum and replace the cap.
•
If overfilling occurs, ensure the excess is removed to avoid excessive foaming.
If staining or unsatisfactory drying is experienced, the dosage
can be adjusted by moving the selector in the dispenser between
1 and 4. The dishwasher is factory set to number 2 setting.
Check the results of each wash before making any adjustments.
It is recommended to increase for water or lime stains and redu-
ce for white or sticky streaks.
IDENTIFYING THE RINSE AID LEVEL
The rinse agent will need replenishing when the viewing window next to the rinse aid cap changes
colour.
ADDING DETERGENT
This is aded to the compartment adjacent to the rinse aid con-
tainer (see Fig. 3).
•
With the door in the horizontal position, press the spring
catch to release the compartment cover.
•
Add the prescribed amount of dishwasher detergent (see the
Program Table on page 11).
•
Close the compartment cover, which is spring loaded.
•
Please also refer to notes on page 11.
LOADING THE DISHWASHER
Always remove any burnt-on, stuck-on or large food residues from all items before loading.
LOWER BASKET
This basket is normally used for plates, dishes, frying pans, saucepans and cutlery (see Fig. 4 and
Fig. 5).
•
Tilt dishes towards you so that the water spray can reach all items and is not impeded.
•
Avoid piling up dishes.
•
Place shallow dishes on the left and deep ones on the right.
•
Place saucepans upside down.
•
Place large plates and frying pans sideways.
•
Ensure that items or handles do not obstruct the rotation of the lifting arm.
8
Fig. 2
Fig. 3
DETERGENT
