USER INSTRUCTIONS
TROUBLESHOOTING
Your dishwasher can automatically diagnose certain types of usage errors or breakdowns. These
are indicated by intermittent acoustic signals and the simultaneous flashing of certain
combinations of Wash Program Indicador lights, as per the following Troubleshooting Table:
12
* As part of the security system, your dishwasher has been installed with a leak detector (housed in the base of the appliance). In the unli-
kely event of water leaking into the base of the dishwasher, the detector would switch on the drain pump to remove any leakage of water
that is in the base.
Other useful troubleshooting tips are:
PROBLEM
The dishwasher does not start
No water is entering the appliance
Dishes are not cleaned properly
INDICATION
PROBLEM
SOLUTION
(FLASHING SYMBOLS)
Ensure door closed
Check stop-cock is on
Check water hoses not kinked
Clean inlet hose filters
Check drain hose
Disconnect from water and
electrical supply and call for
service
• Note down flashing lights
• Switch off machine and call
for service, giving your per-
sonal information and that
of the machine:
- model
- serial number
- purchase date
• Fill in guarantee first
Door not completely closed
No water entering appliance
Appliance does not drain
Appliance overflows
Control unit failure
Failure i NTC
Overheating
* Water leak or water hose
damaged
POSSIBLE CAUSE
•
The mains electricity has been cut off
•
The door has not been closed correctly
•
The stop-start button has not been pressed
•
The mains water has been cut off or closed at the tap
•
A suitable dishwasher detergent has not been used
•
The detergent cover has not been closed correctly
•
The dishwasher has not been loaded correctly
•
The spray arms are being jammed by dishes or cutlery
•
The spray holes on the arms are blocked with debris
•
The filter has not been cleaned or fitted correctly
•
Rinse aid settings / usage are incorrect
•
Water softener settings / usage are incorrect
