Baumatic B260.1SS-A, Инструкция по эксплуатации

Страница: 24 / 32

IMPORTANT: When the above steps have been followed, it is
necessary to reassemble all of the components.
o
You should pay particular attention to the wiring, it is important
to make sure that no wiring has been damaged during the door
reversal operation.
o
You should ensure that all the electrical components and the
oven programmer work correctly before refitting the upper cover
of the oven.
Installing the oven into the kitchen cabinet
24
Ventilation
cut out.
Ventilation
cut out.
Fixing the oven into a cabinet.
o
Ensure that the aperture that you will be fitting the oven into is
of the size given in the above diagram.
o
Ensure that the rear panel of the furniture housing unit has been
removed.
o
This oven may be installed without any additional ventilation cut
outs being made in the housing unit. However the ventilation cut
out indicated by the arrow in figure 1
MUST be present,
otherwise the oven may overheat. This applies to a built in or
built under installation.