Baumann OptiShift, Инструкция по установке и эксплуатации

Страница: 16 / 20

SHIFTWARE
Introduction:
Using the Shiftware software allows you to modify the way your OptiShift
Transmission Control System behaves. You can customize shift-points as well
as monitor and diagnose the OptiShift unit in real-time.
Setup:
To create a calibration for the OptiShift, you can either use the wizard or load
one of the supplied files included on the Shiftware disc.
To use the setup wizard, click the
New button. The wizard will guide you
through the setup process.
To load a standard configuration for your transmission, click the
Open
button on the toolbar, then browse to the folder where the transmission
calibration files are located. The files are named according to the transmission
and RPM range. (Calibrations are saved as “.BTC” files.) Choose the calibration
file and click
Open .
Once the calibration file is loaded, click the System Settings button on the
toolbar to check the settings and make sure that they are correct for your
transmission. The System Settings window has several tabs within it. Click each
one to see each section of settings specific for your transmission.
The System Settings Window
16