Baumann OptiShift, Инструкция по установке и эксплуатации

Страница: 15 / 20

Twist Machine Shrifter TM :
For this configuration, you will need to connect the Dark Blue wire (Pin 14 on the
Vehicle Connector) to COM2 of the receiver, and connect the Light Blue wire
(Pin 6 on the Vehicle Connector) to COM1 of the receiver. You can use either a
push-button on / off switch or a toggle on / off switch. Refer to the previous two
sections on how to install and use the on / off switch. Remember that the
Manutronic jumper must be installed in the OptiShift TCS and the correct
settings used in the Shiftware setup.
15