Baumann OptiShift, Инструкция по установке и эксплуатации

Страница: 12 / 20

Manual Shift Connections
Manutronic Overview:
If connected and enabled in the software, the ManuTronic feature will allow
manual selection of all forward gears using paddles, push-buttons, or another
type of switch. With ManuTronic engaged, a brief press of the
UPSHIFT button
will change to the next higher gear, while DOWNSHIFT will change to the next
lower gear. ManuTronic also has a safety feature which inhibits downshifting if
the engine RPM is too high, which prevents over-revving of the engine due to a
driver's error.
Manutronic Reference Supply (JW2-5)
There are several different ways to configure the Manutronic to meet your
specific needs. Depending on your Manutronic configuration, you may need to
install or uninstall the Manutronic jumper (JW2-5). You can find the jumper
settings manual on the OptiShift software disc in PDF format.
This jumper supplies 5V to the Manutronic 1 input and should be installed for all
Manutronic configurations (except for a Ford cruise control system). See the
sections below for further explanation.
12