Baum VISIO 22, Руководство пользователя

Страница: 11 / 28

Getting familiar with your new VISIO 22 11
WARNING: Avoid having fingers or (pieces of) clothes jammed into
the mechanism of the XY-table underneath the reading platform. Please
put your hands on top of or on the front side of the reading platform. Do
not reach underneath the sides or underneath the rear side of the
reading table.
Let us try the buttons on the control panel now. We have already
learned, the power on button is the leftmost button.
In the middle of the control panel, there is a round knob. This is the
zoom knob which controls magnification. Turning this knob clockwise
will increase magnification while turning it counter clockwise will
decrease magnification. Turn the zoom knob counter clockwise to the
end position to obtain minimum magnification.
The minimum zoom level is not intended for reading; however it gives
you a better overview on the document structure. Thus you can easily
find the position you want to view at higher magnifications.
Now, press the picture button . The picture button is located to the right
of the zoom knob. Pressing this button will set VISIO to real colour or
picture mode. This mode is ideal for viewing images and it also serves
for reading bad print and for writing or filling in forms. It provides all
natural colours in all shades.
So move the XY-table until you see one of the images of your document.
If the image is too small, increase magnification by turning the zoom
knob clockwise. If you got lost and do not know where you are on the
document, decrease magnification, move the XY-Table and increase
again.
VISIO will remember the last setting even after power off.
You already know a lot about VISIO now, however let us read some text.
Move the XY-table to a position where you see some text on the display.
Now press the text button . The text button is the rightmost button on the
control panel. The image will be displayed in high contrast now and in