Baum VISIO 22, Руководство пользователя

Страница: 10 / 28

Getting familiar with your new VISIO 22 10
8 Getting familiar with your new VISIO 22
You have already learned how to position VISIO on your desk and you
have connected VISIO to the power supply.
You can slightly tilt the display so that you can comfortably view the
screen. Do not tilt too much; do not try to exceed the stopper position.
Now, switch on VISIO 22 and use it for the first time.
The
control panel
is mounted right below the screen. The
power
button
is the leftmost one. A short press for about a second on the
power button will switch on VISIO 22. As soon as the lights turn on, you
may release the power button. The Display may show a message
“Invalid video mode”, after a few seconds VISIO shows a magnified
image.
You can switch VISIO 22 off by pressing the power button for more than
a second. Thus, touching this button accidentally will have no effect.
Practice switching on and off VISIO for a few times then leave it switched
on to proceed.
Place a document on the XY-table . Please use something coloured, like
a brochure or magazine with text and images.
You can align a document horizontally by moving it against the silver rim
at the back end of the XY-table. Thus you will track a line when moving
the XY-table left and right.
The XY-table provides a brake that can fix the table. At the front edge,
you find the brake lever . Put it in the leftmost position and you can move
the XY-table freely in all directions. In the middle position, you can move
the XY-table left and right only and the up down position is fixed. In the
rightmost position the table is fixed in all directions.
Now, align your document against the back rim and position the brake
lever in the leftmost position.