40
Cold phase
•
Each programme contains a 10-minute cold phase
prior to program completion to allow the laundry
and the drum to cool down.
•
The cold phase must not be shortened, interrupted
or even left out: increased creasing and danger of
burning.
Programme end
•
The end of the programme is signalled by a buzzer.
•
This serves to remind you that the drying
programme is finished and that the laundry can be
removed.
Crease protection
•
If the laundry is not removed after the programme
has finished, the 20 minute long crease protection
will start automatically. In order to avoid creasing,
the laundry is rearranged and loosened.
•
The crease protection phase may be interrupted at
any time in order to remove the laundry.
Programme finished
•
In position the timer programme has finished;
the laundry must now be removed.
Switch Off
•
The drying programme selector knob must be set
to position.
•
Switch off the appliance by pressing the “ON/OFF”
button. This may be done after the drying
programme has finished, at the start, during, or at
the end of the crease protection phase.
•
The indicator lamp above the “ON/OFF” button will
go out.
•
Turn the water supply tap(s) off.
DRYING - COLD PHASE / PROGRAMME END
