39
Drying
Note:
If a detergent dosing aid was used it must be
removed prior to drying.
First cycle
•
Load laundry and close door
•
Set programme selector knob to red
position.
•
Set the drying time according to load and
degree of drying.
•
Switch on the appliance by pressing the
“ON/OFF” button.
Second cycle
After completion of the first drying cycle, set the
drying programme selector knob to position
and remove laundry.
•
Switch off the appliance by pressing the
“ON/OFF” button.
•
Load laundry, close door and select drying
time.
•
Switch on the appliance by pressing the
“ON/OFF” button.
Reselecting the programme
During the washing programme
The drying programme can be altered at any
time during the washing programme:
•
change the drying time by turning the
selector knob in the appropriate direction.
During the drying programme
•
Turn drying programme selector knob into
the zero position
•
Switch off the appliance by pressing the
“ON/OFF” button.
•
During the drying programme the drying time
can be shortened or extended.
•
Never terminate the drying programme
without cooling phase - danger of burns!
Interrupting the programme
•
Interruption of an active programme should
be avoided.
•
If a programme must be interrupted, the
programme selector knob must be turned
into the cooling phase position.
•
A 10-minute cold phase will follow
automatically to allow the laundry and the
drum to cool down.
•
The door can then be opened and the
laundry removed.
DRYING
DRYING - RESELECTING / INTERRUPTING THE PROGRAMME
